Sort by:
0.6 mm nozzles – more flow, faster results
0.6 mm nozzles increase material flow and allow more stable outer walls at moderate layer height. Perfect when parts need to be robust or time is tight – without completely giving up detail.
Strengths of the 0.6 mm nozzle
- Visibly faster than 0.4 mm with suitable profiles
- Stronger walls & better layer adhesion
- Good compromise between speed and surface
Recommended layer heights & usage
- Layer height: approx. 0.20–0.36 mm
- Use: mounts, housings, mechanical prototypes
Compatibility & systems
- MK8 / V6 / Volcano
- Revo (corresponding Revo nozzles)
- Bambu P1/A1/X1 – matching system nozzles
- Creality K series – matching K system nozzles
Nozzle material choice
- Brass: universal, best thermal conductivity
- Hardened steel: mandatory for CF/glass fiber filled filaments
- Coated High-Flow nozzles: for higher volume flows
FAQ about 0.6 mm nozzles
How much faster is 0.6 mm compared to 0.4 mm?
Depending on the profile and part, print times can decrease significantly, as wider paths and higher volume flows are possible.
Which layer height fits?
0.20–0.36 mm. For visible surfaces rather 0.24–0.28 mm, for productivity towards 0.32–0.36 mm.
Do I need a stronger hotend?
For high speeds, a hotend with a larger melt zone (High-Flow) helps, but is not mandatory.
Which nozzle for CF filament?
Hardened steel or wear-resistant coatings – otherwise brass wears out quickly.