Brass nozzle 0.2 mm for Creality K1/K1 Max - 1 piece

PrimaCreator Creality K1/K1 Max brass nozzle 0.2 mm - 1 piece

PrimaCreator's premium nozzles are a range of replacement nozzles that can make a significant difference in print quality. A high-quality nozzle is like a sharp pencil – it is crucial for a great print.

High-quality workmanship

All PrimaCreator nozzles are made of high-quality brass or steel (depending on the type) and are manufactured in a modern factory. Production is carried out with a tolerance of less than ± 0.01 mm, which means your filament has a very smooth and clear surface when extruded, leading to better print results.

After this process, the material undergoes an ultrasonic cleaning bath and is then cleaned again and protected against surface oxidation. The nozzle is now shaped with millimeter precision.

Removing sharp edges is an important step as it greatly affects the outcome. Too many sharp edges can make the nozzle more prone to clogging. Therefore, it is crucial that the nozzle is very smooth and clean before use. In each batch, some nozzles are selected and cut in half to ensure all specifications are met and the surface is in perfect condition.

The nozzles are finally checked one last time and individually packed in a protective box – ready to be shipped to you.

Available sizes

• 0 = 0.20 mm
• 3 = 0.40 mm
• 4 = 0.60 mm
• 5 = 0.80 mm

Recommendations

For the best results and optimal print quality, we recommend realigning the build plate after switching to a new nozzle. Please note that a PrimaCreator nozzle may be compatible with your printer, but the distance between the nozzle and the build plate needs to be adjusted.

The manufacturing process

The production of a PrimaCreator nozzle begins with the selection of high-quality material. Upon arrival at the factory, the material used for each batch of nozzles undergoes an initial visual inspection. Then the material is clamped and formed into a long rod. In our process, this happens only once, whereas in many other (more affordable) cases, this process must be repeated several times, often up to 3-4 times, without achieving the same results.

Nozzle compatibility

• Creality Ender-3 KE
• Creality CR-10 SE
• Older versions of the Creality K1 & K1 Max

Please check the serial number of your K1 and K1 Max. If it ends with 23, the nozzle fits. If it ends with 24, the nozzle does not fit.