BuildTak 3D printing surface - Ø 304 mm

BuildTak 3D Print Surface - Ø 304 mm (Ø 12")

The BuildTak 3D print surface is a thin, durable plastic sheet applied to the print bed of FDM (Fused Deposition Modeling) 3D printers. It provides an ideal surface for 3D printing and replaces the use of blue painter's tape or polyimide films like Kapton. Made from high-quality, heat-resistant raw materials, BuildTak ensures a stable printing platform where 3D printed objects adhere and can be easily removed.

Advantages of BuildTak

• Works excellently with ABS, PLA, and other materials without the need to change the surface. No pre-treatments like hairspray or acetone required!
• Easy to install on the print bed and cleanly removable without adhesive residue.
• Robust and durable with proper care, it provides additional protection for the original print surface.
• Creates an optimal bond between the 3D printed object and the print surface while preventing warping. After printing is complete, the object can be easily removed with minimal effort.
• Patented, heat-resistant composition that withstands typical temperatures on heated print beds (110-125°C). BuildTak is made from UL flame-retardant raw materials.
• BuildTak just works!

Main features

• Compatible with ABS, PLA, HIPS, PET+, Brick, wood, and flexible (TPE) filaments; nylon and t-glase (PETT) also adhere well when a thin layer of washable glue stick is applied to the BuildTak surface.
• Easier installation than traditional painter's tape or films with fewer air bubbles.
• Protects the print bed.
• Heat-resistant and durable, can be reused for many consecutive prints without needing to change the print surface.
• Maximizes adhesion between the 3D printed object and the print surface, increasing the likelihood that the object stays in place during printing and can be easily removed afterward.

Frequently Asked Questions (FAQ)

What is BuildTak?

BuildTak is an ideal 3D printing surface for FFF 3D printers. It offers a superior alternative to painter's tape or heat-resistant films (like Kapton) on your FFF 3D printer's print bed. BuildTak consists of a patented, specially textured plastic film that adheres to your print platform with a heat-resistant adhesive.

Why is BuildTak better than painter's tape and heat-resistant films?

BuildTak sheets are stiffer and therefore easier to install, less prone to air bubbles, and more durable, providing better protection for the print bed.

How do I use BuildTak?

1. Thoroughly clean your print platform.
2. Cut the BuildTak sheet to the size of your print bed (if necessary).
3. Remove the white backing layer and apply the BuildTak sheet to the print bed.
4. Re-level the surface and ensure the nozzle height is correctly set.

What are the best practices for the longevity of BuildTak?

Use a spatula or scraper with smooth, rounded edges. Avoid sharp objects and strong solvents like acetone. Make sure the nozzle does not come into direct contact with the BuildTak surface.

Which materials does BuildTak work with?

BuildTak works with ABS, PLA, HIPS, PET+, Brick, wood, and flexible (TPE) filaments. Nylon and t-glase (PETT) also adhere well when a thin layer of washable glue stick is used.