1. Manual extrusion
(1) Unlock the extruder, pull out the Teflon tube, and insert the filament from the outside until it runs through the Teflon tube.
(2) Heat the nozzle to 200°C via the machine's screen and insert the filament from top to bottom.
(3) Push the filament further until it flows out of the nozzle.
(4) Lock the extrusion switch, reinsert the Teflon tube, and cool down the nozzle.
2. Semi-automatic extrusion (recommended method)
(1) Open the motor cover and unlock the extruder.
(2) Insert the filament until it can no longer be pushed further.
(3) Lock the extruder switch.
(4) Click "Extrude" on the machine's screen. Watch the nozzle. If the filament is pushed out, wait until "Extrusion complete" is displayed. If no filament is pushed out, gently push the filament forward and click "Extrude" again.
